DELTA 23-710 1/5-Horsepower Wet/Dry Sharpening Center with 8-Inch Horizontal Wet Wheel and 5-Inch Vertical Dry Wheel

By on Monday, June 27th, 2011 | 3 Comments

DELTA 23-710 1/5-Horsepower Wet/Dry Sharpening Center with 8-Inch Horizontal Wet Wheel and 5-Inch Vertical Dry Wheel

  • 120-volt, 0.2-horsepower tool sharpening center with both wet and dry wheels
  • Cast-iron construction improves accuracy
  • 5-inch diameter dry wheel with eye shield to deflect sparks; 8-inch diameter wet wheel with front/rear splash guards
  • Sharpening center includes the wet wheel, dry wheel, tool rest base, sliding tool holder, water tank, tool rest, eye shield, wrench, and manual
  • 16-by-21-by-13-inches; weighs 42.5-pounds

The DELTA 23-710 1/5 HP Wet/Dry Sharpening Center with 8-Inch Horizontal Wet Wheel and 5-Inch Vertical Dry Wheel runs on a powerful 120-volt, 0.2 HP motor and utilizes a wet/dry system for a variety of hardened and non-hardened tool sharpening jobs. The cast-iron design improves accuracy by minimizing operating vibrations. It includes base holes for workbench or tabletop mounting. The 5-inch diameter dry wheel has a tool rest that adjusts to variable wheel wear and an eye shield to deflect spark

List Price: $ 345.45

Price: $ 345.45

Related Jig Saw Bench Products

Northern Industrial Bench-Mount Saw Chain Sharpener

By on Sunday, June 19th, 2011 | 3 Comments

Northern Industrial Bench-Mount Saw Chain Sharpener

Saw chain sharpener operates at 110V/60 Hz and runs at 5500 RPM to sharpen chains with 1/8in. and 3/16in. pitches. Adjustment knobs make changing the sharpening angle simple. Includes 3/16in. grinding wheel. 1/8in. grinding wheel sold separately. Application: Chainsaw sharpener, Mount Type: Bench mount, Rated RPM: 5,500, Volts: 110V/60, Chain Pitch (in.): Variety, Wheel Diameter (in.): 3 15/16, Arbor Size (in.): 7/8, Wheel Included: Yes

List Price: $ 39.99

Price: $ 39.99

Related Saw Bench Products

Bench or Wall-mount Electric Chain Saw Sharpener

By on Monday, June 6th, 2011 | 3 Comments

Bench or Wall-mount Electric Chain Saw Sharpener

  • Electric Chain Saw Sharpener

Precision angle adjustment to keep your chain in top condition. Height and scale positioning.

Chain vise adjusts to all chain designs and pitches
Includes 4-1/4” x 1/8” grinding wheel
Mounts to bench, wall, or vise
Large side safety guard
4200 RPM grinding speed
4-1/4″ wheel with 7/8” arbor
115 volt, 0.75 amp, direct drive ball bearing motor

Vise capacity: 0.5″-0.8″; Table vise angle: 0-35° right or left; Spindle thread: 9/16″-18 NPT; Power cord: 7 ft. 11″; Wheel dimensions: 4-1/4

List Price: $ 89.99

Price: $ 42.95

JET J-4002 1-Inch by 42-Inch Bench Belt and Disc Sander

By on Thursday, April 7th, 2011 | No Comments

JET J-4002 1-Inch by 42-Inch Bench Belt and Disc Sander

  • Hinged idler wheel cover
  • Power take off, allows for mounting an optional flex shaft, can be used for carving, drum ssanding, deburing and dozens of other jobs
  • Deluxe miter gauge turns and locks for common angles 45° left and right
  • Abrasive belt unit does the work of a jig-saw, copying saw or hand file while removing material and finishing at the same time, allows the operator to get into small oppenings plus handle odd shapes and angles
  • Removable platen allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt

The JET J-4002 Benchtop Belt and Sander features a power take off, which allows for mounting an optional flex shaft for carving, drum sanding, deburring and dozens of other jobs. Abrasive belt unit does the work of a jig saw, coping saw or hand file while removing material and finishing at the same time, allowing operator to get into small openings plus handle odd shapes and angles. Deluxe miter gauge turns and locks for common angles 45deg left and right. Application: Metal sanding and grindin

List Price: $ 349.00

Price: $ 349.00

More Hand Saw Bench Products

Northern Industrial Bench- or Wall-Mount Saw Chain Sharpener

By on Wednesday, April 6th, 2011 | No Comments

Northern Industrial Bench- or Wall-Mount Saw Chain Sharpener

  • Chain must be removed from saw before sharpening

Versatile Saw Chain Sharpening unit can be mounted on your workbench or wall for best results when sharpening your saw chain. Adjustable height and angle plus large handle for easy operation. Application: Chainsaw sharpener, Mount Type: On your workbench or wall, Motor: 110V, 60 Hz motor, Rated RPM: 3,600, Volts: 110, Watts: 230, Chain Pitch (in.): 1/4 – 3/4, Wheel Diameter (in.): 1/8, 3/16 and 1/4, Arbor Size (in.): 7/8, Includes: Lamp and disc guard, Wheel Included: Yes (3), Assembly Required:

Price: $ 128.99

Find More Saw Bench Products

CHAIN SAW (SOLO 10 HP) STARTED OFF A BENCH GRINDER

By on Saturday, March 19th, 2011 | 4 Comments

We had to cut some wood so we chose to get a chain saw to cut it. This chain saw has not been ran for ages and after a few pulls the cord failed and while we were repairing it my mate had cut it with a hand saw. I true fashion and the fact that we are male with a touch of red neck we got the bench grinder with a buffing wheel to start it. Check it out as this may come in handy one if you find yourself in the same boat.

« Older Entries