This 5 speed bench-top radial drill press features variable swing up to 34″ and pivoting heads for drilling at just about any angle. Truly versatile! Specifications: Motor: 1/2-HP, single-phase, 110V Overall height: 31-1/2″ Spindle travel: 3-1/4″ Number of speeds: 5 Drill chuck: 5/8″ Range of speeds: 550, 880, 1520, 2490, 3470RPM Swing: 34″ maximum Table: Precision ground cast iron Table size: 8-5/8″ x 9″ Table swing: 360° Table tilts: 90° in both directions Approx. shipping weig
Powerful 15-Inch floor model drill press ideal for home or professional use
3/4-Horsepower motor
16-Speeds ensure proper application for a variety of different jobs
Includes built-in work lamp
Weighs 180-Pounds
Includes 3/4 HP 15-in 16-Speed Floor Mount Drill Press – 354166, Drill Chuck, Chuck KeyThe Jet 3/4-Horsepower 15-Inch Floor Model Drill Press features a built-in work lamp, an on-board 5/8-inch chuck key, and a power-conserving design. It also includes a rectangular cast iron table for stability and durability, and a 45-degree table tilt and 360-degree table swing for maximum versatility. In addition, it features 16-speeds to ensure proper application for a variety of different jobs.
For safer and more accurate drilling, the DELTA 20-619 6-inch Drill Press Vise lets you clamp the materials you’re working on securely to your workbench. With a quick release that lets you adjust to various sized workpieces with a quick and simple sliding of a tightening screw, you’ll be able to get things done faster. A final tightening can be done with a turn of the crank handle. The vise features cast iron construction, and has slots so you can mount it to drill press tables. The jaws of the
Mini drill press lets you drill with accuracy. HP: 1/3, Volts: 120, Speed (RPM): 620-3100, Speeds (qty.): 5, Vertical Stroke: 2in., Swing: 8in., Drilling Capacity (in.): 1/2, Chuck Size (in.): 1/2, Worktable L x W (in.): 6 5/8 x 6 9/16, Dimensions L x W x H (in.): 7 x 16 15/16 x 22 1/2
I found a treadmill motor for at a junk dealer and I decided to replace the original AC induction motor on my Canedy-Otto Royal 16″ bench drill press with the intension of adding infinitely variable speed and instant reversing. I made a base adapter plate that adapted the new motor to the original mount without the need for modification. After a little research and a couple failed attempts at creating my own pulse width modulation motor controller and power supply, I found an MC-60 treadmill speed controller on ebay. All I needed was a couple switches ( On / Off, Fwd / Rev), a 5K ohms potentiometer and a box. Input power is 110V AC Full speed voltage 120V DC Speed range currently 0 – 1400 RPM (using slowest driven pulley) HP is unknown Instant reversing seems to be working under load at all speeds. But because I used a treadmill motor controller, the speed knob must be reset to zero every time power is turned on. This has not been a big deal, but I’ve only had this working for a few minutes. I might change the box to an aluminum version and I still need to replace the lumpy v-belt and make a control panel faceplate. Otherwise, I’m very happy with this upgrade. By the way, I’m rebuilding the original motor to be used elsewhere in the shop. Video Rating: 5 / 5
Featuring the exceptional durability of solid steel and cast iron construction, the RIKON 30-120 13-Inch Drill Press offers the convenience of 16 spindle speeds and large cast iron handle for easy operation. Powerful and easy to use, the 30-120 has a 13-inch swing, and it is ideal for both the hobbyist and professional user. 30-120 13-Inch Drill Press At a Glance:Rugged, user-friendly design with 1/2-horsepower motor for professionals and hobbyists
